Read the racket from the outside in. The face strikes the ball, the frame surrounds the head, and the foam core sits between the faces. Finish by checking the handle and wrist strap.
Read a racket from head to handle
If a listing calls a racket “carbon,” look for the line that says where the carbon is used. A carbon frame can surround fiberglass faces. The material at the edge and the material touching the ball answer different buying questions.
| Part | Where to find it | What to check |
|---|---|---|
| Face and holes | The perforated hitting surface on each side | Read the surface material separately from the frame specification. |
| Core | Sandwiched between the two faces | Look for the named foam, often EVA. Compare the manufacturer’s description within that range. |
| Frame | The perimeter of the head | Check the frame material and inspect the rim on a used racket. |
| Throat or bridge | The transition from head to handle | Look at the junction from both sides when inspecting a demo racket. |
| Handle and grip | The wrapped section in your hand | Hold it as you would for a volley and check whether the grip thickness suits you. |
| Wrist strap | Attached at the butt of the handle | Check its attachment and wear it around your wrist during play. |
Try this with a real specification sheet
Babolat lists its Air Vertuo 2.6 with fiberglass at the surface, carbon in the frame and Black EVA in the core. If two rackets list similar materials, compare weight and balance next. When a demo is available, try the same forehand volley with each racket, using the same balls. That gives you a practical comparison alongside the specification sheet.
Babolat’s racket specifications · Babolat’s guide to padel equipment and the wrist strap
Related: Buying padel balls by the can or the case.
Compare round, teardrop and diamond heads, or inspect the handle with the replacement grip and overgrip guide.
Common questions
Does a carbon frame mean the racket has carbon faces?
A racket can have a carbon frame and fiberglass faces. Read the surface, frame and core entries separately on the model’s specification sheet.
